Coupling Grease

Why Coupling Grease?
Sufficient lubrication is vital for satisfactory gear coupling operation. Gear Coupling Grease is specifically made for gear coupling applications to improve coupling lifestyle whilst drastically minimizing servicing time. Its substantial viscosity base oil and tackifier mix to maintain the grease in spot and avoid separation and it truly is in complete compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in colour and produced that has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces commonly discovered in couplings. Bearing or common objective greases tend to separate and eliminate effectiveness resulting from high centrifugal forces to the several ingredients at high rotational speeds. These large centrifugal forces encountered in couplings separate the base oil through the thickeners. Hefty thickeners, which have no lubrication characteristics, accumulate during the gear tooth mesh region resulting in premature coupling failure. Gear Coupling Grease is built to very resistant to centrifugal separation with the oil and thickener, which makes it possible for the lubricant for being used to get a rather extended period of time.
One of the tricks to your achievement of Gear Coupling Grease will be the variable consistency throughout the operating cycle with the application. The consistency of our gear coupling grease improvements using the operating circumstances. Doing work with the lubricant below actual support circumstances leads to the grease to turn into semi-fluid, functionally solash lubricating the put on surfaces of your coupling. As the grease cools, it returns to the original consistency, thereby stopping leakage.
Gear Coupling Grease is obtainable from stock in 14 oz. cartridges, one lb. and five lb. cans.
Capabilities
Minimizing of coupling dress in
Resistance to water washing
Corrosion and rust protection
High load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in spot underneath large speeds
Resistance to centrifugal separation
Reduction in down time & upkeep cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated with a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.