ep

January 20, 2021

DC MOTOR PUMP GROUP one
Basic Description
Consisting of a hefty duty DC motor and the CB1S gear pump, this pump motor group is an perfect hydraulic power unit for mobile hydraulic equipments, this kind of as car carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP 2
Common Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and verify valve.
DC MOTOR PUMP GROUP 3
Common Description
This motor pump includes a 4.5″ DC motor along with a CBSR gear pump which has a standard power up/gravity down circuit that has a relief valve, a test valve along with a solenoid release valve.
Distinctive Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all of the hydraulic parts concerned before mounting the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~68 cst, which ought to also be clean and absolutely free of impurities. N46 hydraulic oil is proposed.
four. The electrical power unit should be mounted horizontally.
5. The relief valve strain is preset about 25% increased compared to the operating pressure.
six. Flow management valve for lowing speed adjustment is accessible unpon request.