Materials Dealing with Power UNIT one
This power unit is made to the fork lift market, consisting of very efficient gear pump, DC motor, manual increase and decrease valve, tank, ect. The up and down movement are managed by the lever on the manual release valve, which can be outfitted with an electric switch to activate the motor. The lowing pace is controlled from the stress compensated movement handle valve.
one. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean each of the hydraulic parts concerned in advance of installation of the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should also be clean and absolutely free of impurities, N46 hydraulic oil is encouraged .
4. Oil altering is required immediately after the first one hundred operation hrs, afterwards after each and every 3000 hours.
5. The power unit proven is made to be mounted horizontally.
Material Dealing with Energy UNIT two
This power unit attributes power up gravity down circuit. Activate the begin solenoid to begin the motor to lift the machine. The lowing motion is activated through the solenoid valve with the reducing velocity managed by the pressure compensated flow control valve. Merchandise of this series is usually broadly used in the industry of logistic devices for example fork lift, mini lift table, etc.
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned prior to mounting the energy unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which really should also be clean and totally free of impurities, N46 hydraulic oil is encouraged .
4. Oil modifying is required following the initial one hundred operation hours,afterwards after each 3000 hrs.
five. The energy unit really should be mounted horizontally.