motor

Observing a handful of rules for appropriate installation is vital to your reputable and right operation of the gearbox or gear motor.
The rules set out here are meant like a preliminary manual to picking gearbox or gear motor. For powerful and appropriate installation, comply with the guidelines offered inside the set up, make use of the maintenances guide for your gearbox out there from our revenue department.
Following is a quick outline of installation principles:
a) Fastening:
Spot gearbox on the surface delivering ample rigidity. Mating surfaces must be machined and flat.
Mating surfaces have to be inside definite geometric tolerances (see manual). This is often especially accurate of flange-mounted gearboxes with splined hollow shafts.
In applications that involve substantial radial loads at the output finish, flange mounting is suggested for some gearbox sizes as this mounting helps make utilization of the double pilot diameters offered in these gearboxes.
Be sure the gearbox is appropriate for that expected mounting position.
Use screws of resistance class eight.8 and over to secure the gearbox. Torque up screws towards the figures
indicated from the pertinent tables.
With transmitted output torque greater than or equal 70% of the indicated M2max torque, and with
frequent motion reversals, use screws with minimum resistance 10.9.
Some gearbox sizes may be fastened applying either screws or pins. Of pin seated inside the frame the gearboxes be at the least 1.five instances pin diameter.
b) Connections
Safe the connection elements to gearbox input and output. Never tap them with hammers or related resources.
To insert these elements, use the support screws and threaded holes supplied to the shafts. You should definitely clean off any grease or protects through the shafts ahead of fitting any connection parts.
Fitting hydraulic motors.
Be cautious the O ring among motor flange and gearbox input flange when assembling. Install the
hydraulic motor before filling lube oil to the gearbox.
Connecting the hydraulic brake.
The hydraulic circuit ought to be such to guarantee that brake is released instants prior to gearbox commences and utilized immediately after gearbox has stopped. Examine that strain inside the hydraulic line for brake release is at zero each time gearbox is stopped.
Course of rotation
Motors are linked to your appropriate electrical or hydraulic circuit based on their course of rotation.
When doing these connections, keep in mind that all gearboxes, whether in the in-line or appropriate angle style and design, have the identical path of rotation the two at input and output. For additional details in the connection of electric and hydraulic motors, see pertinent sections on this catalogue.