Pinbush coupling
We are the leader in industrial Pinbush couplings, pin bushing couplings, flexible pin bushing couplings, standard cone ring couplings and pin bushing couplings with flat bushings (UPB) from Chicago, America Wholesaler.
specification | All standards |
Ingredients | stainless steel |
Usage/application | Industrial application |
rated power | high |
Maximum speed | high |
Torque | high |
Number of pins | 3 to 18 |
place of origin | Made in America |
Industrial Pinbush Coupling specification |
Contacts | Torque Nm | The smallest.boring. (Mm) | Maximum aperture (mm) | Maximum.Speed rpm | A | B | C | D | E | F |
PBC1 | 3 | 77 | 12.7 | 28 | 6100 | 95 | 79 | 38 | 3 | 40 | 58 |
PBC2 | 4 | 310 | 12.7 | 30 | 5100 | 114 | 99 | 48 | 3 | 42 | 70 |
PBC2A | 6 | 516 | 16 | 42 | 4400 | 130 | 105 | 51 | 3 | 60 | 70 |
PBC3 | 4 | 621 | 16 | 48 | 3600 | 160 | 107 | 51 | 5 | 68 | 114 |
PBC4 | 4 | 831 | 20 | 65 | 3000 | 191 | 125 | 60 | 5 | 90 | 114 |
PBC4A | 6 | 1241 | |||||||||
PBC5 | 6 | 1662 | 25 | 75 | 2600 | 225 | 157 | 76 | 5 | 105 | 114 |
extra information:
- Delivery time: Ex-Sock
View full details
specification | All standards |
Size/size | All standards |
Ingredients | Cast iron (DIN 1693 GG 20/25), steel C40 (EN/DIN 10263-2), natural rubber, polyurethane. |
Usage/application | Industrial application |
rated power | high |
Maximum speed | high |
Torque | high |
Number of pins | 3 to 18 |
place of origin | Made in America |
Elecon-Ping Bush specification |
Critics | Torque daNm | Pilot hole | The smallest.drilling | Maximum.boring. | C | ØB1 | ØB2 | L | G | M | Contacts | application.Weight (kg) | GD2 (kg.m2) | Maximum.Speed (rpm) | ||
KW/revolution | Horsepower/revolution | ØA1 | ØA2 | ||||||||||||||
EFC-01 | 0.01 | 0.01 | 7 | 12 | 16 | 32 | 28 | 85 | 48 | 42 | 32 | 3 | 50 | 4 | 1.5 | 0 | 7860 |
EFC-02 | 0.01 | 0.02 | 10.8 | 12 | 16 | 38 | 32 | 105 | 60 | 48 | 38 | 3 | 52 | 4 | 2.5 | 0.01 | 6360 |
EFC-03 | 0.02 | 0.03 | 21 | 12 | 16 | 42 | 40 | 112 | 63 | 60 | 42 | 3 | 52 | 5 | 3 | 0.01 | 5960 |
EFC-04 | 0.03 | 0.05 | 33 | 16 | 20 | 48 | 45 | 127 | 72 | 63 | 48 | 3 | 64 | 6 | 4.75 | 0.03 | 5260 |
EFC-05 | 0.06 | 0.08 | 53 | 16 | 20 | 55 | 50 | 144 | 72 | 63 | 60 | 3 | 64 | 8 | 7 | 0.05 | 4635 |
extra information:
- Delivery time: spot
View full details
specification | All standards |
Size/size | All standards |
Ingredients | Cast iron (DIN 1693 GG 20/25), steel C40 (EN/DIN 10263-2), natural rubber, polyurethane. |
Usage/application | Industrial application |
Number of pins | 3 to 18 |
place of origin | Made in America |
We deal with | New only |
Pinbush specification RB |
KWh 100 speed |
Maximum bore | Outside diameter | Length passed Bore |
Shaft clearance | |
Bush Half | Needle half | |||||
105 3 | 1 | 30 | 32 | 105 | 45 | 2 6 |
116 4 | 1.53 | 39 | 42 | 116 | 45 | 2 6 |
125 4 | 1.73 | 45 | 50 | 125 | 50 | 2 6 |
144 6 | 3.33 | 50 | 60 | 144 | 55 | 2 6 |
162 6 | 5.6 | 60 | 65 | 162 | 60 | 2 6 |
178 6 | 6.73 | 70 | 75 | 178 | 70 | 2 6 |
198 10 | 13 | 80 | 90 | 198 | 80 | 2 6 |
228 11 | 21.5 | 90 | 100 | 228 | 90 | 4 10 |
252 12 | 32.1 | 105 | 115 | 252 | 100 | 4 10 |
285 11 | 47.7 | 115 | 125 | 285 | 110 | 4 10 |
320 12 | 64 | 125 | 135 | 320 | 125 | 4 10 |
360 11 | 93 | 135 | 145 | 360 | 140 | 4 12 |
400 10 | 126 | 160 | 160 | 400 | 160 | 4 12 |
450 12 | 195 | 180 | 180 | 450 | 180 | 4 12 |
500 14 | 270 | 200 | 200 | 500 | 200 | 4 12 |
560 10 | 325 | 225 | 225 | 560 | 220 | 4 8 |
630 12 | 440 | 250 | 250 | 630 | 240 | 4 8 |
710 12 | 785 | 260 | 260 | 710 | 260 | 5 9 |
800 14 | 1047 | 280 | 280 | 800 | 290 | 5 9 |
900 16 | 1623 | 305 | 305 | 900 | 320 | 5 9 |
extra information:
- Delivery time: spot
View full details
Usage/application | Industrial application |
Ingredients | Cast iron, natural rubber, steel C40 |
specification | URC 20 to URC 215 |
type of packaging | Gift box |
speed | Up to 65000 RPM |
tolerance | standard |
machining | high |
Diameter | Up to 240MM aperture |
Material grade | Cast iron DIN 1693 GG20/25, nitrile rubber ASTM D2000 710, steel C40 EN/DIN 10263-2 |
Whether to customize | customize |
I trade | New only |
place of origin | Made in America |
KX elastic coupling is a universal coupling that can adapt to accidental, parallel, angular and axial displacement of the connecting shaft, and has the added advantage of high torsional flexibility.
The rubber bushing is designed to absorb vibration and greatly reduce the noise level in the event of severe torque fluctuations.
KX couplings are easy to maintain and can replace wearing parts without disturbing the driving and driven machines.
KX selection
* Service factor-Determine the appropriate service factor (SF) from the table below.
* Coupling size-determine the equivalent coupling kilowatt rating as follows:
Refer to Table B and start reading from KW every 100 rpm until you find a power equal to or greater than the design power.The size of the required coupling is given at the beginning of the column.
* Hole size-According to the size on table B, check whether the required hole can be accommodated.
Note: The standard coupling can withstand occasional instantaneous peak loads, up to twice the normal rated capacity.
Service factors:
The minimum service factor (SF) of the KX coupling.These service factors are only used as general guidance and are a supplement to the customer's professional knowledge of their own equipment.
specified load | Applications | Service factor (SF) | |
uniform | Centrifugal pumps (uniform loading), rotary compressors (uniform loading), conveyors and elevators (uniform loading), exciters. | Fans and blowers-light generator (uniform load), mixer-liquid (constant density) | 1 |
Light shock | Screens, textile machines, agitators, centrifugal pumps (fluctuating load), rotary compressors (fluctuating load), conveyors and elevators (uneven supply), cranes-light/medium, fans and blowers (heavy), feeders- Conveyor or rotation. | Generator (pulsating load), kiln (small and medium-sized), pipeline shaft, machine tool, mixer (variable density, pump (gear and blade), pump (hydraulic), woodworking machinery | 1.5 |
Moderate shock | Air Cp,(ressors (multi-cylinder), Ball & Road Mills, Cement Mills, Copper & Brass Rolling Mills, Crane (Heavy Duty), Hosits & Haulages (medium duty), Kilns (large & Heavy Duty), Paper Mill Equipment. | Punches and forming machines, Plungrr pumps (covering cylinders), reciprocating pumps, shears and guillotines, ship propulsion, sugar crushing rollers, shuttle conveyors, welding generators | 2 |
Thump | Sugarcane crushers, hammer mills, hoists and haulers (heavy duty), mining machinery, rubber industrial equipment-rubber mixers and crushers, rubber mills | Sawmill equipment, air compressor (single cylinder), dredge, drilling rig, plunger pump (single cylinder), rolling mill, tube mill | 2.5 |
Extremely shocked | Conveyors and feeders (reciprocating, vibrating, vibrating), crushers-ore and stone. | Steel Shheas & Croppers, Bar Stock Steel manufacturing, heavy | cranes and cranes. | 3 |
extra information:
- Delivery time: spot
View full details
specification | All standards |
Size/size | UPB 95 to UPB 530 |
Ingredients | Cast iron (DIN 1693 GG 20/25), steel C40 (EN/DIN 10263-2), natural rubber, polyurethane. |
Usage/application | Industrial application |
rated power | Reached 249 [Email protection] |
Maximum speed | 6100RPM |
Torque | 77 to 23780 nautical miles |
Number of pins | 3 to 20 |
place of origin | Made in America |
The main function
- Better misalignment tolerance
- Provide rubber bushings of various materials, such as natural, nitrile, polyurethane, etc.
- Operating temperature up to 70 degrees Celsius
- Time-tested concept
- Rated torque range: 77Nm – 23780Nm
- Maximum speed RPM 6100 (UPB 095) to 1080 (UPB 530)
- KW ratings are in the range of 100 RPM: 0.81 – 249 and 11.66 – 0 at 1440 RPM and 24.3 – 0 at 3000RP
extra information:
- Delivery time: spot
View full details
Explore more categories
All rights reserved (Terms of Use)
- Development and management EPT coupling