ep

January 18, 2021

General Description
Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is made to operate materials managing equipment. The reducing motion is achived by the solenoid valve with all the lowering pace managed by an adjustable needle valve. The left and proper functions are outfitted having a dual pilot operated check valve and cross-over relief valves.
Remark: Please seek advice from our sales engineer to the various pump displacement, motor energy or tank capability.
Particular Notes
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean each of the hydraulic parts concerned before installation of the energy unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which must also be clean and absolutely free of impurities.N46 hydraulic oil is proposed.
four. This power unit ought to be mounted horizontal.
5. Check the oil level within the tank after the first begin on the power unit.
6. Oil modifying is required following the initial one hundred operation hours, afterwards after every single 3000 hours.