Product Description
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
Product Description
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
Company Profile
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Can flexible couplings be used in servo motor and stepper motor applications?
Yes, flexible couplings are commonly used in both servo motor and stepper motor applications. They play a crucial role in connecting the motor shaft to the driven load while compensating for misalignments and providing other essential benefits:
- Servo Motor Applications: Servo motors require precise motion control and high responsiveness. Flexible couplings are well-suited for servo motor applications because they offer the following advantages:
- Misalignment Compensation: Servo motors are sensitive to misalignments, which can lead to decreased performance and increased wear. Flexible couplings can accommodate angular, parallel, and axial misalignments, ensuring that the motor and driven load remain properly aligned during operation.
- Vibration Damping: Flexible couplings help reduce vibrations, which is crucial for servo motor applications that require smooth and precise motion. By absorbing and dissipating vibrations, flexible couplings contribute to the overall stability and accuracy of the system.
- Backlash Minimization: Some flexible couplings have minimal to no backlash, making them suitable for high-precision servo motor applications where any play or clearance between components could affect performance.
- High Torque Capacity: Servo motors often require high torque transmission capabilities. Flexible couplings are available in various designs and materials, allowing for the selection of couplings with appropriate torque ratings for specific servo motor applications.
- Stepper Motor Applications: Stepper motors are commonly used in open-loop control systems where precise positioning is necessary. Flexible couplings are used in stepper motor applications due to the following reasons:
- Misalignment Tolerance: Stepper motors can experience misalignments, especially in dynamic applications. Flexible couplings can handle misalignments without introducing significant backlash or affecting the stepper motor’s accuracy.
- Cost-Effectiveness: Flexible couplings are often more cost-effective than other types of couplings, making them a practical choice for stepper motor applications, especially in cases where precision requirements are not as stringent as in servo motor systems.
- Shock Load Absorption: Some stepper motor applications involve abrupt starts and stops, leading to shock loads. Flexible couplings can absorb these shocks and protect the motor and driven load from damage.
- Simplicity: Flexible couplings are simple in design and easy to install, making them a popular choice in various stepper motor applications.
Overall, flexible couplings offer valuable benefits in both servo motor and stepper motor applications. They help improve system performance, reduce wear on components, and enhance the overall reliability of the motion control systems they are employed in.
How does a flexible coupling help in torque and rotational speed control?
A flexible coupling plays a crucial role in torque and rotational speed control in rotating machinery. It offers several benefits that contribute to efficient power transmission and help maintain desired operating conditions:
- Torque Transmission: Flexible couplings transmit torque from one shaft to another while accommodating misalignments. They provide a reliable connection that allows the driving shaft to transfer rotational force (torque) to the driven shaft without causing undue stress on the connected components.
- Smooth Power Transmission: Flexible couplings help reduce shocks and vibrations that can occur during startup, shutdown, or sudden load changes. By damping these vibrations, the coupling ensures smooth power transmission and protects the connected equipment from unnecessary wear.
- Rotational Speed Control: In certain applications, especially those involving precision motion control, maintaining consistent rotational speed is critical. Flexible couplings can help by minimizing backlash and torsional wind-up. Backlash refers to the play or gap between the coupling’s components, while torsional wind-up is the twisting deformation that can occur under torque load. Flexible couplings with low backlash and high torsional stiffness contribute to accurate rotational speed control.
- Compensation for Misalignment: Rotating machinery may experience misalignment due to various factors such as thermal expansion, foundation settling, or machining tolerances. Flexible couplings accommodate angular, parallel, and axial misalignments, which helps in maintaining proper alignment between the shafts and reduces unnecessary torque variations.
- Protection from Overloads: Flexible couplings can act as a mechanical fuse by disengaging or slipping when subjected to excessive torque loads. This feature protects the connected components from damage caused by sudden overloads or jamming events.
- Energy Efficiency: Certain types of flexible couplings, such as elastomeric couplings or beam couplings, have low mass and inertia. This characteristic reduces energy losses and contributes to overall system efficiency.
By providing reliable torque transmission, smooth power transfer, rotational speed control, and compensation for misalignment, flexible couplings optimize the performance and longevity of rotating machinery. Additionally, they enhance the safety and efficiency of various industrial processes by protecting equipment from excessive loads and ensuring smooth operation in diverse applications.
What role does a flexible coupling play in reducing downtime and maintenance costs?
A flexible coupling plays a significant role in reducing downtime and maintenance costs in industrial machinery and rotating equipment. Here are the key ways in which flexible couplings contribute to these benefits:
- Misalignment Compensation: One of the primary functions of a flexible coupling is to accommodate misalignment between two connected shafts. Misalignment can occur due to various factors such as thermal expansion, foundation settling, or manufacturing tolerances. By allowing for misalignment, flexible couplings reduce the transmission of harmful forces and stresses to connected components, minimizing wear and preventing premature failures that could lead to costly downtime and repairs.
- Vibration Damping: Flexible couplings have inherent damping properties due to the elastomeric or flexible elements they incorporate. These elements absorb and dissipate vibration and shock loads that may arise from the operation of rotating machinery. By dampening vibrations, flexible couplings protect the connected equipment from excessive wear and fatigue, extending their service life and reducing the need for frequent maintenance or replacement.
- Shock Load Absorption: In applications where sudden loads or shocks are common, such as in heavy machinery or high-speed equipment, flexible couplings act as shock absorbers. They can absorb and dissipate the impact energy, preventing damage to the machinery and minimizing downtime caused by unexpected failures or breakdowns.
- Easy Installation and Alignment: Flexible couplings are designed for ease of installation and alignment. Unlike rigid couplings that require precise shaft alignment, flexible couplings can tolerate some degree of misalignment during installation. This feature simplifies the setup process, reduces installation time, and lowers the risk of misalignment-related issues, ultimately minimizing downtime during initial installation or replacement of couplings.
- Reduced Maintenance Frequency: The ability of flexible couplings to handle misalignment and dampen vibrations results in reduced wear on bearings, seals, and other connected components. Consequently, the frequency of maintenance intervals can be extended, reducing the need for frequent inspections and component replacements. This directly translates to lower maintenance costs and less downtime for maintenance tasks.
- Equipment Protection: By reducing the transmission of shock loads and vibrations, flexible couplings act as protective barriers for connected equipment. They help prevent catastrophic failures and subsequent damage to expensive machinery, avoiding unplanned shutdowns and costly repairs.
Overall, flexible couplings are critical components that improve the reliability and longevity of rotating equipment. Their ability to handle misalignment, dampen vibrations, and protect against shock loads contributes to reduced downtime, lower maintenance costs, and increased productivity in industrial applications.
editor by CX 2024-02-06
China Alloy Steel Forging Steel Spline Gear Shaft Coupling Shaft Coupling for Gear Pump coupling agent
Guarantee: 3 a long time
Applicable Industries: Constructing Materials Retailers, Production Plant, Machinery Restore Stores, Design works , Power & Mining
Customized assistance: OEM, ODM, OBM
Construction: Equipment
Flexible or Rigid: Rigid
Standard or Nonstandard: Normal
Materials: custom made
Merchandise Name: Custom-made forging Steel massive Internal tooth Equipment Ring
Software: Market/Gearbox/ Transmission Elements
Dimension: Customer’s Drawing
Processing: Hobbing/Milling/Shapping
Regular: DIN/GB/AISI
Floor treatment: Sprucing/Grinding/ Portray/Anti Rust Oil
Heat Teatment: QT/Hardening/Carburizing
Blank: Forging or Casting as per drawing.
Quality Manage: Nondestructive Tests (UT/MT/RT/PT)
Certificate: ISO9001
Packaging Details: 1.Picket box with fumigation 2.Picket Fram with waterproof cloth
Port: ZheJiang or HangZhou Port
1. Normal: DIN GB, GOST, AISI, etc.2. Certification: ISO9001, Kind E, Sort A, CO3.Report: Materials Report Hardness Report UT/MT Report Proportions checking report Mechanical Home Check Report
| Product Identify | Coupling |
| Type | Broaching, China lower value Graphite Ramie Pure PTFE packing Braiding device Drilling,Laser Machining,Milling,Other |
| Material | Aluminum,Brass,Bronze,Copper,Hardened Metals |
| Standard | DIN GB ISO JIS BA ANSI |
| Heat Treatment | Hrdening&Tempering,Area Quenching,Integral Quenching,Carburizing Quenching ,Tempering ,Normalizing,Nitriding |
| Application | Be widely used in all varieties of transmission, speed altering, rotation andother civilian or armed forces tools. |
Q: How lengthy is your delivery time?A: Generally it is thirty~forty five times. or it is in accordance to quantity and specialized necessity
Q: Do you provide samples ? is it free of charge or extra ?A: Of course, we could supply the sample.But it is not for totally free.
Types of Coupling
A coupling is a device used to join two shafts together and transmit power. Its primary function is to join rotating equipment and allows for some end movement and misalignment. This article discusses different types of coupling, including Magnetic coupling and Shaft coupling. This article also includes information on Overload safety mechanical coupling.
Flexible beam coupling
Flexible beam couplings are universal joints that can deal with shafts that are offset or at an angle. They consist of a tube with couplings at both ends and a thin, flexible helix in the middle. This makes them suitable for use in a variety of applications, from motion control in robotics to attaching encoders to shafts.
These couplings are made of one-piece materials and are often made of stainless steel or aluminium alloy. However, they can also be made of acetal or titanium. While titanium and acetal are less common materials, they are still suitable for high-torque applications. For more information about beam couplings, contact CZPT Components.
Flexible beam couplings come in a variety of types and sizes. W series couplings are good for general purpose applications and are relatively economical. Stainless steel versions have increased torque capacity and torsional stiffness. Flexible beam couplings made of aluminum are ideal for servo and reverse motion. They are also available with metric dimensions.
Flexible beam couplings are made of aluminum alloy or stainless steel. Their patented slot pattern provides low bearing load and high torsional rigidity. They have a long operational life. They also require zero maintenance and can handle angular offset. Their advantages outweigh the disadvantages of traditional beam couplings.
Magnetic coupling
Magnetic coupling transfers torque from one shaft to another using a magnetic field. These couplings can be used on various types of machinery. These types of transmissions are very useful in many situations, especially when you need to move large amounts of weight. The magnetic field is also very effective at reducing friction between the two shafts, which can be extremely helpful if you’re moving heavy items or machinery.
Different magnetic couplings can transmit forces either linearly or rotated. Different magnetic couplings have different topologies and can be made to transmit force in various geometric configurations. Some of these types of couplings are based on different types of materials. For example, a ceramic magnetic material can be used for applications requiring high temperature resistance.
Hybrid couplings are also available. They have a hybrid design, which allows them to operate in either an asynchronous or synchronous mode. Hysterloy is an alloy that is easily magnetized and is used in synchronous couplings. A synchronous magnetic coupling produces a coupled magnetic circuit.
Magnetic coupling is a key factor in many physical processes. In a crystal, molecules exhibit different magnetic properties, depending on their atomic configuration. Consequently, different configurations produce different amounts of magnetic coupling. The type of magnetic coupling a molecule exhibits depends on the exchange parameter Kij. This exchange parameter is calculated by using quantum chemical methods.
Magnetic couplings are most commonly used in fluid transfer pump applications, where the drive shaft is hermetically separated from the fluid. Magnetic couplings also help prevent the transmission of vibration and axial or radial loads through the drive shaft. Moreover, they don’t require external power sources, since they use permanent magnets.
Shaft coupling
A shaft coupling is a mechanical device that connects two shafts. The coupling is designed to transmit full power from one shaft to the other, while keeping the shafts in perfect alignment. It should also reduce transmission of shock loads. Ideally, the coupling should be easy to connect and maintain alignment. It should also be free of projecting parts.
The shaft couplings that are used in machines are typically made of two types: universal coupling and CZPT coupling. CZPT couplings are designed to correct for lateral misalignment and are composed of two flanges with tongues and slots. They are usually fitted with pins. The T1 tongue is fitted into flange A, while the T2 tongue fits into flange B.
Another type of shaft coupling is known as a “sliced” coupling. This type of coupling compensates for inevitable shaft misalignments and provides high torque. Machined slits in the coupling’s outer shell help it achieve high torsional stiffness and excellent flexibility. The design allows for varying engagement angles, making it ideal for many different applications.
A shaft coupling is an important component of any machine. Proper alignment of the two shafts is vital to avoid machine breakdowns. If the shafts are misaligned, extra force can be placed on other parts of the machine, causing vibration, noise, and damage to the components. A good coupling should be easy to connect and should ensure precise alignment of the shaft. Ideally, it should also have no projecting parts.
Shaft couplings are designed to tolerate a certain amount of backlash, but it must be within a system’s threshold. Any angular movement of the shaft beyond this angle is considered excessive backlash. Excessive backlash results in excessive wear, stress, and breakage, and may also cause inaccurate alignment readings. It is therefore imperative to reduce backlash before the shaft alignment process.
Overload safety mechanical coupling
Overload safety mechanical couplings are devices that automatically disengage when the torque applied to them exceeds a specified limit. They are an efficient way to protect machinery and reduce the downtime associated with repairing damaged machinery. The advantage of overload couplings is their fast reaction time and ease of installation.
Overload safety mechanical couplings can be used in a wide range of applications. Their automatic coupling mechanisms can be used on any face or edge. In addition, they can be genderless, incorporating both male and female coupling features into a single mechanism. This means that they are both safe and gender-neutral.
Overload safety couplings protect rotating power transmission components from overloads. Overload protection devices are installed on electric motors to cut off power if the current exceeds a certain limit. Likewise, fluid couplings in conveyors are equipped with melting plug elements that allow the fluid to escape when the system becomes too hot. Mechanical force transmission devices, such as shear bolts, are designed with overload protection in mind.
A common design of an overload safety mechanical coupling consists of two or more arms and hubs separated by a plastic spider. Each coupling body has a set torque threshold. Exceeding this threshold may damage the spider or damage the jaws. In addition, the spider tends to dampen vibration and absorb axial extension. This coupling style is nearly backlash free, electrically isolating, and can tolerate very little parallel misalignment.
A mechanical coupling may also be a universal joint or jaw-clutch coupling. Its basic function is to connect the driver and driven shafts, and limits torque transfer. These devices are typically used in heavy-duty industries, such as steel plants and rolling mills. They also work well with industrial conveyor systems.
CZPT Pulley
The CZPT Pulley coupling family offers a comprehensive range of couplings for motors of all types. Not only does this range include standard motor couplings, but also servo couplings, which require ultra-precise control. CZPT Pulley couplings are also suitable for engine applications where high shocks and vibrations are encountered.
CZPT Pulley couplings have a “sliced” body structure, which allows for excellent torsional stiffness and strength. They are corrosion-resistant and can withstand high rotational speeds. The couplings’ design also ensures accurate shaft rotation while limiting shaft misalignment.
CZPT Pulley has introduced the CPU Pin Type couplings, which are effective at damping vibration and maintain zero backlash. They are also made from aluminum and are capable of absorbing heat. They come with recessed tightening screws. They can handle speeds up to 4,000 RPM, and are RoHS-compliant.
editor by CX 2023-07-03
in Samarkand Uzbekistan sales price shop near me near me shop factory supplier POM Plastic Starter Cylindrical Spur Spline Shaft Drive Machine Gear manufacturer best Cost Custom Cheap wholesaler
Trying to keep in head that excellent provider is the key to cooperating with customers, we attempt to fulfill high top quality specifications, provide aggressive costs and make certain prompt supply. The team has taken part in the producing and revising of ISO/TC100 global chain standard several several years in success and hosted the sixteenth ISO/TC100 Global yearly assembly in 2004. The product effectively shows environmental protection and energy preserving.
POM plastic starter cylindrical spur Spline shaft EPT EPT EPT
| Gears materials | Nylon Glass Fiber,GF-Abs,POM,PP,Personal computer,PA66,UHMW-PE,PPS and many others. |
| Procedure | Injection molding ,CNC machining ,Extrusion method |
| Surface area | Matted/Smooth, as customers’ drawongs |
| Size | OEM or tailored as drawing |
| Hues | Nature White Black Yellow Pink Blue |
| Software | Industry EPTs : EPT EPTs/Filling /beer EPTs /Conveyor gear ,Mine EPT and many others. Electronic EPT: hausehold EPTs,VR,specific instrument EPT spare elements: covers, EPTs, bushing ,pipes ,and so on. |
| Molding sort | EPT Molding, Insert Molding, Over Molding ,EPT shade molding |
| Cavities | Easy, Multi -cavities(ten-forty) |
| Value | Advantaged rates ( Immediate from our factory) |
| Sample | Free sample offer |
| Molding time | fifteen-25days |
| Delivery time | 7-15daEPTafter sample quality verified |
Production:
one. The employees are skilled to inspect the EPTs and notice any defect in generation in time.
two. QC will examine 1pcs every single 100pcs in CNC machining, and EPTs will meet all dimension tolerances.
3. Gears will be inspected at each and every stage, and EPTs will be inspected ahead of shipment, and all inspection documents will be retained in our manufacturing unit for a few a long time.
four. Our revenue will send out you pictures at every single EPTs creation methods, and you will know the detailed creation status, and you can discover any chance of miscalculation, for our product sales, QC and staff are trying to keep near look at on all generation.
five. You will feel us functioning very meticulously to guarantee the good quality and straightforward to perform with,
six. we cherish each and every inquiry, every single prospect to make EPTs and elements and cherish every customer.
High quality Manage Procedure:
1) Inspecting the raw substance –IQC)
two) Examining the particulars prior to the manufacturing line operated
three) Have full inspection and routing inspection in the course of mass manufacturing—In approach quality control (IPQC)
four) Checking the EPTs right after generation concluded—- (FQC)
five) Examining the EPTs soon after they are concluded—–Outgoing high quality management (OQC)
Services:
one. Molds patterns as for each customers’ EPTs drawing
two. Distributing molds drawings to customers to review and affirm ahead of mols generation.
three. Providing samples with EPT proportions and beauty inspection report, content certification to consumers.
4. Providing inspection report of EPTant proportions and beauty in batches elements.
EPT and shipment:
one. Gears are nicely and cautiously packed in PP luggage in CTNS, strong sufficient for categorical shipping, air shipment or sea shipment.
two. Air cargo, sea cargo or shipment by DHL, UPS, FedEx or TNT are availabe.
three. EPT phrases: EXW, FOB HangEPT, or CIF
four. All shippings will be very carefully arranged and will attain your spots quickly and safely.
FAQ
Q1: How to assure the EPT of EPTs and parts?
We are ISO 9001:2008 accredited manufacturing facility and we have the built-in technique for EPT parts good quality management. We have IQC (incoming top quality manage),
IPQCS (in procedure top quality manage EPT), FQC (final quality manage) and OQC (out-heading high quality manage) to control each approach of EPT parts prodution.
Q2: What are the Advantage of your EPTs and areas?
Our gain is the aggressive and sensible prices, rapidly shipping and high top quality. Our eployees are dependable-oriEPTd, welcoming-oriEPTd,and dilient-oriEPTd.
Our EPT areas merchandise are showcased by stringent tolerance, clean end and EPT-existence overall performance.
Q3: what are our machining equipments?
Our machining equipments incEPT plasticn EPT machinies, CNC milling EPTs, CNC turning EPTs, stamping EPTs, hobbing EPTs, computerized lathe EPTs, tapping EPTs, grinding EPTs, slicing EPTs and so on.
This fall: What shipping and delivery waEPTdo you use?
EPTly, we will use UPS DHL or FEDEX and sea delivery
5: What materials can you method?
For plastic EPT EPTs and parts, the components are Nylon, PA66, NYLON with thirty% EPT fibre, Stomach muscles, PP,Computer,PE,POM,PVC,PU,TPR,TPE,TPU,PA,PET,EPTPE,PMMA and many others.
For metal and machining EPTs and components, the materials are brass, bronze, copper, stainless steel, steel, EPT, EPTium plastic and so on.
Q6: How EPT is the Supply for Your EPTs and elements?
EPTly , it will take us fifteen functioning daEPTfor EPT or machining, and we will try out to shorten our direct time.
Gear Cost made in China – replacement parts – in Toronto Canada Coupling Flange Rigid Pin Spacer HRC Mh Nm Fenaflex Spacer Motor Shaft Universal Half Oldham Reducer Spline Tyre Drive Grid EPT al Elastomeric with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 diverse branches. For much more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Gear Coupling Flange Rigid PIN Spacer HRC MH NM Fenaflex Spacer motor shaft common 50 % oldham reducer spline tyre travel grid mechanical elastomeric
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 different branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique equipment manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our firm and the shown substitution parts contained herein are not sponsored, accredited, or produced by the OEM.
Best China manufacturer & factory Agricultural in Dasmarinas Philippines Machinery Parts 1 3 8" 6 Spline Forged Free Wheel Clutches For Pto Drive Shaft With high quality best price
![Ideal China maker & factory Agricultural in Dasmarinas Philippines Machinery Areas 1 3 8" 6 Spline Forged Cost-free Wheel Clutches For Pto Push Shaft With high top quality very best price](http://img.hzpt.com/uploads/images/sprocketpulleygearbox-ali/Hd35be9d0f7714087a82712c65aad482fx.jpg "Best China manufacturer & factory Agricultural in Dasmarinas Philippines Machinery Parts 1 3 8" 6 Spline Forged Free of charge Wheel Clutches For Pto Travel Shaft With high quality best price")
The group has taken element in the creating and revising of ISO/TC100 international chain normal several a long time in good results and hosted the 16th ISO/TC100 Intercontinental yearly conference in 2004.
Overview
Rapid Details
- Warranty:
-
1.5 years
- Relevant Industries:
-
Manufacturing Plant
-
After Warranty Provider:
It is our intention to supply a large variety of quality products at cost-effective costs, offer the best services for buyers satisfied and add to our ongoing advancement. -
On-line assist
- Local Service Location:
-
None
- Showroom Spot:
-
Italy
- Sort:
-
Shafts
- Place of Origin:Zhejiang, China
- Manufacturer Title:
-
OEM
- Regional Provider Area:
-
Italy
- certificate:
-
CE
- Materials:
-
Steel
- Construction:
-
W or S
- Tube:
-
Triangular, Lemon, Star tube
- Procedure:
-
Forged
- Style:
-
Customized
- Certificate:
-
CE Certificate
- Deal:
-
Iron pallet&wood carton®ular export packaging
Supply Capability
- Supply Potential:
- 2Breathers or vent plugs eliminate interior force buildup, but frequently provide a leakage route for lubricant. Bubbles of oil form in excess of the air passageway and at some point percolate to the outside the house.0000 Piece/Parts for every Month
The EP Line PTO travel shafts are recognizable simply because of the EP Line patented coupling mechanism and the versatile cone. The PTO push shafts are distinguished via person-friendliness, compactness and attractive layout.
Packaging & Supply
- Packaging Particulars
- Packing specifics:Iron pallet&picket carton®ular export packaging
- Port
- NINGBO OR SHANGHAI
Online Customization
Item Details
Product Data
PTO Shaft
The electrical power consider-off (PTO) is a sophisticated mechanism, enabling implements to draw vitality from the engine and transmit it to yet another software. It works as a mechanical gearbox which can be mounted on the vehicle’s transmission.
The energy just take-off shaft (PTO shaft) is a vital element, made and produced for steady large-duty use. A excellent PTO shaft ought to be robust enough to bear the torsion and shear tension and decrease vibration.
Setforge, the forging subsidiary of Ever-Energy Team, manufactures cold extruded PTO shafts for all varieties of agriculture autos. Our PTO shafts offer you wonderful dependability and longevity during day-to-day use.
EP Group has been internationally identified as a trustworthy global supplier. Our condition-of-the-art manufacturing procedure and seasoned engineers make certain the top-quality of all Farinia factors.
| After Warranty Services | Online video technological assist |
| Relevant Industries | Producing Plant |
| Local Provider Spot | Italy |
| Showroom Spot | Italy |
| Warranty | 1.5 a long time |
| Sort | Shafts |
| Area of Origin | China |
| China | Zhejiang |
| Model Title | EPG |
| certification | CE |
| Materials | Metallic |
| Composition | W or S |
| Tube | Triangular, Lemon, Star tube |
| Approach | Forged |
| Design and style | Personalized |
| Certification | CE Certificate |
| Bundle | Iron pallet&wooden carton®ular export packaging |
Item Display
Merchandise Show
CAT 23 Fast Hitch
PTO travel shaft Hi …
PTO Push Line Gen …
CompanyInfo
Firm Profile
Ever-Electricity Group
EPG have high-tech machinery and examination products. We can make entire world course large precision items.
Certifications
Certifications
Shipment & Payment
Our Benefits
A: Your inquiry associated to our products or charges will be replied in 24 hours.
B: Protection of your revenue spot, ideas of style and all your private info.
C: Very best quality and aggressive price.
……
faq
FAQ
1) How can I spot purchase?
A: You can get in touch with us by email about your order details, or spot get on line.
2) How can I pay out you?
A: Soon after you affirm our PI, we will request you to pay out. T/T (HSBC financial institution) and Paypal, Western Union are the most typical methods we are using.
……
Customized Cost made in China – replacement parts – in Sangli India Mini CNC Machining Aluminum Part High Precision Spline Coupling Shaft with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For far more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Product Description
The spline shaft is a sort of mechanical transmission, which transmits mechanical torque. There is a longitudinal keyway on the outer floor of the shaft, and the rotating member sleeved on the shaft also has a corresponding keyway, which can hold rotating synchronously with the shaft. Whilst rotating, some can also slide longitudinally on the shaft, these kinds of as gearbox shifting gears.
Merchandise variety
Connected Products
Our firm specialize in generating all types of inside and exterior equipment, large precision spline shaft and gear shaft. We are hunting ahead to the cooperation with you, and we imagine that we will be your ideal option.
Firm Information
HangZhou Xihu (We EPT Lake) Dis.g EPT EPT Co., Ltd. was established in 1980. We are specialized in precision elements and factors machining, which are utilized in electronics, automotive elements, astronautical elements, health-related appliances and hand resource industries. We provide a variety of design and producing which includes customized CNC machining, CNC machined areas, non-normal device areas, machined casting Areas and precision turned components. The materia EPT of hardware elements incorporate steel, stainless steel, brass, aluminum and plastic. If you are interested in any of our items, you should truly feel free to speak to us. We are seeking forward to the cooperation with you, and we imagine that we will be your best choice.
Our organization has one of the mo EPT stringent quality manage methods,from our feed testingand solution inspection to the ultimate inspection procedure.Stringent high quality procedure management and administration ensurus solution high quality and accountabilty.
FAQ
1)Are you trading company or producer?
We are manufacturing facility.
2)How can I personalize my products?
Attach your drawing with particulars(surface area treatment method,content,quantity and unique needs and so on.)
3)How lengthy can I get the quotation?
We will give you the quotation inside 48 several hours(considering the time big difference)
4)How prolonged will you generate the elements?
Generally it is 5-ten times if the merchandise are in inventory. Or it is fifteen-25 days if the goods are not in inventory, it is in accordance to quantity.
5)Do you provide samples? Is it cost-free or added?
Yes, we could supply the sample, the samples and delivery fees require to be borne by the shopper.
6)What is your terms of payment?
Payment≤1000 USD, a hundred% in progress. Payment≥1000 USD, thirty% T/T in advance, stability prior to shipment. If you have any inquiries, you should do not be reluctant to speak to us.
7)What if the items we acquired are not good?
Make contact with us without having hesitation, our unique right after-sales service will consider the accountability
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original equipment manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our business and the detailed substitute areas contained herein are not sponsored, accredited, or created by the OEM.
CNC Cheap made in China – replacement parts – in Memphis United States Machine Turning Steel Extended Motor Spline Shaft with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
| Use | For new vitality vehicle electric travel shaft/travel motor shaft/Motor rotation shaft/Motor spline shaft/Motor shaft,and so forth |
| Specification | Length:100-500mm,Exterior Dia.:20-90mm,Spline module:.8-3 or Customized |
| Area Treament | Anodizing/ Oxiding/ Zinc plating/ Nickel plating/ Chrome plating/ Silver plating/ Gold plating/ Imitation gold plating/ Sand blasted/ Brushed/ Silk display/ Passivation/ Power coating/ Painting/ Alodine/ Warmth treatment method/ Teflon and many others. |
| Tolerance | +/-.005mm or +/- .0002 |
| Content | Stainless Metal,Carbon Metal We handle several EPT variety of resources. You should get in touch with us if your needed content is not outlined earlier mentioned. |
| Inspecation Gear | Coordinate measuring machining/ Projector/ Caliper/ Microscope/ Micrometer/ Substantial gauge/ Roughness tester/ Gauge block/ Thread gauge etc. |
| Good quality Control | one hundred% inspection |
| Personalized | Sure,all are customized in accordance clients’ drawings design or sample |
| Our Buyer | BYD,TOYOTA,Honda,GAIC Group ,SAIC group, BAIC team,Broad-Ocean,AKEI,Inovance, Chinaedrive,etc |
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 distinct branches. For far more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique products manufacturer’s (OEM) part quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our business and the detailed substitute components contained herein are not sponsored, approved, or created by the OEM.
Wing China braber equipment pto shaft assembly Style Slip Yoke, Spline Yoke. with ce certificate top quality low price
We – EPG Group the most significant agricultural gearbox and pto manufacturing unit in China with five different branches. For much more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
pto universal joint alternative Our walterscheid pto yoke company drive shaft myvi one.3 has tractor pto shaft strong 2011 nissan rogue generate shaft financial pto shaft energy, john deere x485 rear pto builds pto shaft bolt up shaftmasters driveshaft a travel shaft for 2006 chevy silverado crew taxi technician team contingent with large quality, possesses the production assembly line of technicalization in China and best technique examining on merchandise quality and operates marketing networks during the nation. The firm was accredited by ISO9001:2008 Top quality Administration Technique. Our organization supply all the MECHANICS Wel yoke and Flange yoke&comma slip Joints&comma spline yoke&period From 2C to 15C&period
Gear China 1 3/8 pto shaft Shaft Gear Milling Shaft Gear Spline Shaft with ce certificate top quality low price
We – EPG Group the biggest agricultural gearbox and pto manufacturing facility in China with 5 different branches. For more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
john deere bush hog pto shaft Our tractor pto shaft shear bolt manufacturing unit mahindra tractor pto shaft has pto shaft cap attained pto shaft harbor freight the measuring pto shaft certificate 2014 mustang driveshaft of dodge ram 3500 a single piece driveshaft China’s pto shafts slide Farm rear fifty percent shaft Equipment Merchandise High quality Authentication promulgated by the Farm Equipment Goods High quality Authentication Centre of China. EPG is specialised in design, manufacturer and product sales of agricultural equipment and farm implements, which has an impartial import and export rights.
Product features
we can make equipment shaft,step shaft,primary shaft,wind turbine shaft,flanges,supporting roller,cast ring,gearbox and other forging and casting elements.
Technological processing:
The Method As Adhere to: ingot → heat → forging → heat therapy(normalizing+tempering) → inspection → rough machining → UT → 2nd warmth treatment method → finishing machining → inspection .
Top quality Handle: UT,MT,RT,PT,chemical composition take a look at,mechanical residence test,and so on.
Warmth Remedy: Normalize,Quenching,Tempering,Anealled.
Surface Remedy: painting,plating,sprucing,black oxide,transparent anti-rust oil.
Inspection: Besides our in-residence inspecion, you could also pick a third celebration inspection.
StHangZhourd: ANSI,ASTM,ASME,API,JIS,DIN,BS,EN,KS,UNI,SABS,GOST.
Certificate: 1, Raw content certificate(content chemical compositon)
2, Heat therapy sheet report
3, Dimension inspection report
4, UT examination report
Packing: Seawort EPT plywood packaged on stell pallets or as customer’s ask for
Supply Date: Decided by the amount and proportions of items. Normally we manage the big diameter rings’ supply time within 5 weeks soon after we receive your official purchase.
Aggressive Benefit: Quality management and management to the entire create process, which includes ingot smelting,forging, heat remedy, machining and strictly last inspection prior to supply.
Technological parameters:
| Substance | Alloy steel,Carbon steel,Carburizing metal,Quenched and tempered metal |
| Heat remedy | Normalizing,Annealing,Quenching&Tempering, Floor Quenching,Situation hardening |
| Machining | CNC Turning,CNC Milling,CNC Unexciting,CNC Grinding,CNC Drilling |
| Gear Machining | Equipment Hobbing,Gear Milling,CNC Equipment Milling,Equipment Reducing,Spiral gear cutting,Equipment Cutting |
| Inspection | Chemical Composition Test,Ultrasonic Test,Penetration Test,Radiographic Take a look at,Magnetic Examination,Tensile Strength Test,Effect Take a look at,Hardness Examination,Dimension Take a look at |
| Module of Gear | eight-one hundred twenty |
| Equipment Grinding | MAX. Module 24 |
| Diameter of Shaft: | MAX. 2 200mm |
| Duration of Shaft | MAX. 13 000mm |
| Diameter of Gear Wheel | MAX.thirteen 000 mm |
| Diameter of Spiral Gear | MAX. 2 200 mm |
| Length of Equipment Shaft | MAX. 5 000 mm |
|
Item |
Machining components |
|
certification |
ISO9001:2008 |
|
Machining equipments |
CNC center, CNC milling equipment, CNC turning equipment, CNC lathes, lathe, 4 axis machine and so on. |
|
Supplies |
Aluminum, Metal, Stainless steel, Brass, Copper, Bronze, Ab muscles, Pc, PO, POM, Nylon, Teflon and many others. |
|
Surface area complete |
Anodize, Plating, Brushing, Sharpening, Blackened, Powder coating, Sandblasting, Laser engraving and many others. |
|
Inspection Equipment |
CMM, Projection, Calipers, Micro caliper, Thread Micro caliper, Pin gauge, Caliper gauge, Go meter, Move meter and so on. |
|
Drawing format |
PDF,dwg,etc |
mechanical inside spline equipment shaft
Complex Specification
|
Item identify |
gear shaft |
|
crucial phrase |
hollow interior spline equipment shaft ,difficult tooth surface |
|
Transient description |
AGMA grade 10,for mining machineryspline part:GB3478 grade 7 |
|
Tooth profile |
involute |
|
Materials |
18Cr2Ni4WA |
|
Procedure |
forging+carburizing+grinding+linear slicing |
|
Pressure angle |
tooth part:20°,spline component:30° |
|
Design |
Mn=9,Z=30,a=20° |
|
Authentic location |
ZheJiang ,china |
|
Model |
NYY |
Our benefits
• Professional Gear Manufacturer
• Expertise in Cooperate with Fortune 500 Companies
• Professional Engineering Functionality
• EPT Top quality
• Realistic Price tag
• Modest Orders Acknowledged
• Steady Enhancements
• Large Merchandise Efficiency
• Prompt Delivery
• Professional Provider
R&D Potential
our organization owns far more than 50 patents.our organization has launched many sophisticated engineering layout
computer software and utilized more than thirty new systems and new procedures. also,our company is certified by
ISO9001:2008 and ISO14001:2004.
1.ideal profile and direct modification helps make meshing far more best!
two.professional modeling analysis softward,dynamic simulation engineering can reduce the prophase test
processes,make the style a lot more practical
Machining Functionality
|
Substance |
Alloy Metal |
Casting Steel |
Gray c EPT iron |
Ductile Iron |
Weldment |
|
20CrMnTi |
20CrMnTi |
HT200 |
QT400-18 |
20CrMnTi |
|
|
20CrMnMo |
20CrMnMo |
HT250 |
QT400-fifteen |
20CrMnMo |
|
|
twenty CrMo |
twenty CrMo |
|
|
twenty CrMo |
|
|
35CrMo |
35CrMo |
|
|
35CrMo |
|
|
42CrMo |
42CrMo |
|
|
42CrMo |
|
|
20Cr2Ni4A |
20Cr2Ni4A |
|
|
20Cr2Ni4A |
|
|
20CrNiMo |
20CrNiMo |
|
|
20CrNiMo |
|
|
20CrNi2Mo |
20CrNi2Mo |
|
|
20CrNi2Mo |
|
|
40CrNiMo |
40CrNiMo |
|
|
40CrNiMo |
|
|
18CrNiMo7-6 |
18CrNiMo7-six |
|
|
18CrNiMo7-six |
|
|
17CrNiMo6 |
17CrNiMo6 |
|
|
17CrNiMo6 |
|
|
34 CrNiMo6 |
34 CrNiMo6 |
|
|
34 CrNiMo6 |
|
|
18Cr2Ni4WA |
18Cr2Ni4WA |
|
|
18Cr2Ni4WA |
|
|
18Cr2Ni4WE |
18Cr2Ni4WE |
|
|
18Cr2Ni4WE |
|
|
45 C |
45 C |
|
|
45 C |
|
|
40Cr |
40Cr |
|
|
40Cr |
|
|
38CrMoAl |
38CrMoAl |
|
|
38CrMoAl |
|
|
16Mn |
16Mn |
|
|
16Mn |
|
|
16MnCr5 |
16MnCr5 |
|
|
16MnCr5 |
|
|
GCr15 |
GCr15 |
|
|
GCr15 |
|
|
Modulus |
1mm-50mm |
||||
|
Precision |
DIN Course 4, ISO/GB Class 4, AGMA Course thirteen, JIS Course |
||||
|
StHangZhourd |
DIN, ISO/GB, AGMA, JIS |
||||
|
Heat therapy |
Quenching and tempering, gear enamel induction quenching, nitriding, carburization |
||||
|
Software |
Wind turbine, locomotive, feeding equipment, metallurgy machinery, mining equipment |
||||
|
Gear shaft duration |
2500mm max. |
||||
|
Weight |
15 tons max. |
||||
| Materials StHangZhourd | GB, EN, DIN, ASTM, GOST, JIS, ISO | ||
| Content Processing | Forging, Casting, Welding | ||
| Heat Remedy | Annealing, Normalizing, Q&T, Induction Hardening | ||
| Machining Tolerance | Max. .01mm | ||
| Machining Roughness | Max. Ra .four | ||
| Module of Gear | eight-60 | ||
| Precision of Enamel | Max. ISO Quality 5 | ||
| Bodyweight/Device | 100kgs – 60 000kgs | ||
| Software | Mining, Cement, Development, Chemical, Oil Drilling, Steel Mill, Sugar Mill and Power Plant | ||
| Certification | ISO 9001 | ||
| OEM AND ODM Provider ARE Supplied | |||
Product:Custom manufactured Inner Spline Shaft / Pto Drive shaft / Equipment Shaft for Huge Engineering Automobiles & Dumper & ATV
China factory high precision excellent cost driving steel shafts
one. All types of gears, gear wheel, equipment shaft, precision gear and sintered gear.
two. Specialised in production all varieties of forging Car: +86~13083988828 portion with drawings
three. Substance: ductile c EPT iron, bronze, carbon steel, stainless metal, alloy steel and copper
4. Modules: M1 to M8
five. Meets ISO, DIN and ASTM stHangZhourds
6. Quality: SUS201,SUS304,SUS316,A2-70,A2-80,A4-eighty,four.eight 6.8 eight.eight 10.nine 12.nine
seven. Measurement: In accordance to the the drawing
eight. Certification: ISO9001, TS16949
|
Content |
Carbon Steel |
SAE1571, SAE1045, Cr12, 40Cr, Y15Pb, 1214Letc |
|
Alloy Metal |
20CrMnTi, 16MnCr5, 20CrMnMo, 41CrMo, 17CrNiMo5etc |
|
|
Brass/Bronze |
HPb59-1, H70, CuZn39Pb2, CuZn40Pb2, C38000, CuZn40etc |
|
|
Tolerance Manage |
Outer Diameter |
Based on drawing |
|
Duration Dimension |
Based on drawing |
|
|
Machining Procedure |
Gear Hobbing, Gear Milling, Gear Shaping, Gear Broaching, Gear Shaving, Equipment Grinding and Equipment Lapping |
|
|
Tooth Accuracy |
DIN Course 4, ISO/GB Class four, AGMA Class thirteen, JIS Class |
|
|
Modules |
one., 1.25, one.five, 1.seventy five, 2., 2.twenty five, two.5….8. and many others |
|
|
Heat Treatment method |
Quenching & Tempering, Carburizing & Quenching, Substantial-frequency Hardening, Carbonitriding |
|
|
Surface Treatment method |
Blacking, Polishing, Anodization, Chrome Plating, Zinc Plating, Nickel Plating |
|
|
StHangZhourd |
DIN, ISO/GB, AGMA, JIS , ISO/TS16949:2009 |
|
Solution Description
| Merchandise Variety | CNC turning, milling, drilling, grinding, wire EDM reducing etc. |
| Our Providers | CNC Machining,Plastic Injection,Stamping,Die Casting,Silicone And Rubber,Aluminum Extrusion,Mould Generating,and many others |
| Material | Aluminum,Brass,Stainless Steel,Copper,Plastic,Wooden,Silicone,Rubber,Or as for each the customers’ specifications |
| Surface Treatment method |
Anodizing,Sandblasting,Portray,Powder coating,Plating,Silk Printing,Brushing,Sharpening,Laser Engraving |
| Dimension | As customers’ request |
| Service Project | To provide creation design, manufacturing and technical services, mould development and processing, and so on |
| Drawing Structure: | PRO/E, Auto CAD, Solid Functions,IGS,UG, CAD/CAM/CAE |
| Testing Machine | Digital Peak Gauge, caliper, Coordinate measuring equipment, projection machine, roughness tester, hardness tester and so on |
| Industry utilised | Machinery large duty tools digital unit Vehicle spare areas optical telecommunication |
| Packing | Eco-welcoming pp bag / EPE Foam /Carton containers or wood boxes As customer’s particular requirements |
| Trial sample time | 7-10 days right after confirmation |
| Delivery time | 7-30 times after receive the pre-payments |
| Payment Terms |
T/T,Western Union,Paypal
|
Company introduction
HangZhou EPT Engineering CO.,LTD is a manufacture of bearings, worm motorists, slewing bearings, gears, shaft and engineering elements. EPT bearings, worm motorists, slewing bearings, gears, shafts confirm every day to be import EPT structural and link components, they can be commonly utilized in the lifting&transportation equipment, mining equipment, EPT equipment, port hoisting equipment, port oil transfer tools, onshore and offshore crane, excavator, concrete equipment, paper device, plastic and rubber machine, weave equipment, cement plant, metal plant, electrical energy plant, wind electrical power generator, other EPT and industry equipment or tools and other big rotary units.
The goods produced by EPT Engineering Co are largely exported to the nations around the world of the European Union, Usa, the Middle East, the South American, the Africa, Austrilian and Asia regions and the Russian Federation, in the procedure of cooperation with our consumers, we have produced it a principle to build a lasting and gratifying partnership with our clients by providing effective support with the leading quality and reducing the generation expense.
Xihu (West Lake) Dis.g for steady dedication to the top quality of goods and consumer provider, EPT Engineering attaches wonderful significance to study and improvement to ensure better item top quality and services from its institution. The quality of EPT merchandise are based mostly on the outstanding professional and technological level of constructors and specialists, hugely qualified operators, ordeals production personnel.
The company name: HangZhou EPT Engineering Co.,ltd
Handle: No 3 Lianmeng Road, Xihu (West Lake) Dis. Region, HangZhou Metropolis, ZheJiang Province, China
Web site:
factory Lowest price manufacturer for Inner Spline Shaft Pto Drive shaft Gear Shaft for Engineering Vehicles
We can provide a full-assortment of power transmission products like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks pto shaft, agricultural gearboxes.
Overview
Fast Information
- Applicable Industries:
-
Production Plant
- Nearby Support Spot:
-
None
- Software:
-
Mechanical Gear
- Floor therapy:
-
Sharpening
- Processing:
-
Turning
- Tolerance:
-
Customer’s Drawing Request
- Warmth treatment method:
-
Higher Frequency Induction Hardening
- Certification:
-
ISO9001:2009/TS 16949
- Services:
-
24 Hrs Online
Provide Potential
- Source Potential:
- 5000 Piece/Pieces for each Month
Packaging & Shipping
- Packaging Information
- Neutral paper packaging,wooden bins for outer box or according to client desire
- Port
- shanghai Port/Ningbo Port
-
Direct Time
: -
Quantity(Pieces) 1 – 1000 >1000 Est. Time(times) 15 To be negotiated
On-line Customization
We Ever-Electrical power Team with 4 branches over 1200 employees is 1 of the largest transmission elements and machining objects manufacturers in China
Merchandise Description:
We specialised in manufacturing automobile gears , motorcycle gears, gearbox, unique vehicle (power takeoff, snowmobiles, engineering vehicles) gears, generator components, stainless metal ice crusher and so forth.
|
Material |
1020,1045,20CrMnTi, and so on. |
|
Machining Method |
Gear Hobbing , Equipment Shaping, Gear Shaving, Gear Grinding |
|
Modules |
one., one.twenty five, 1.5, one.seventy five, 2., two.25, 2.5….8. and many others. |
|
Heat Remedy |
Carburizing & Quenching, Carbonitriding |
|
Common |
DIN, ISO/GB, AGMA, JIS,ISO/TS16949:2009 |