We EPG has established up a total set of good quality administration method which is presented with innovative inspection and take a look at equipment. – EPG Group the biggest agricultural gearbox and pto manufacturing facility in China with 5 different branches. For more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
sixteen-63mm PPR Pipe Extrusion Line with Vacuum Calibration Spraying Cooling Tank Devices
HDPE Pipe Software:
Agricultural Irrigation water provide&Sweage drainage pipe&Discharge program&Fuel supplly technique&Architectural water provide.
Production Flow of Pipe Generation Line:
Material →Color Mixer →Automatic Feeder→Hopper Dryer →Single Screw Extruder →Extrusion Mould & Calibrator → Vacuum Calibration Cooling Tank → Spray Cooling Tank →Printer → Haul-off Unit →Cutter →Stacker or Coiler
Attributes of Pipe Machiner:
1- 30m/min of greatest lineal extrusion speed, massive capability and low electricity intake, and achieved multi- layers co extrusion with 1-5 levels.
two- The copper bush is a lot more use-resisting and avoid material leakage which can assure a steady running of extruder.
three- Substance feed through spiral groove, efficient transmission and can successfully reduce back-strain on extruder.
4- Distinctive layout (barrier, shearing and mixing zone) assures a uniformed plasticizing influence, and can reduce the stress on the screw which assures a large speed and stable output capability.
5- Substantial torque equipment box has a wise figuration, compact building, lower sound, higher carrying potential, high transmission efficiency can assure lengthy-time difficulties-cost-free operation
six- PCA(pipe air cooling system) of die head largely increase the extrusion pace and reduce the cooling length of extrusion line, and improve good quality of interior pipe area
7- Intelligent PLC managing method with human-helpful interface make the operation effortlessly and conveniently
8- Chip-free cutter ensuing flat and smooth cutting surface of pipe.
Main Technical Parameter:
| Machine model | Pipe diameter | Vacuum Calibration Tank | Spray Cooling Tank | Haul-off unit | cutter | ||||
| Vacuum pump | Water pump | Length(mm) | H2o pump | Size(mm) | caterpillar Quantity | Motor | Cutting type | ||
| HDPE63 | φ16mm-φ63mm | 3kw*2 | 3kw*2 | 6000mm | 3kw*one | 6000mm | 2 | 1.5kw*2 | No dust cutter |
| HDPE-one hundred ten | Φ40mm-φ110mm | 4kw*2 | 3kw*two | 6000mm | 3kw*one | 6000mm | two | 3kw | No dust cutter |
| HDPE-one hundred sixty | Φ50mm-φ110mm | 4kw*two | 4kw*2 | 6000mm | 4kw*one | 6000mm | three | one.1*3 | Planetary cutter |
| HDPE-250 | Φ75mm-φ250mm | 5.5kw*2 | five.5kw*2 | 6000mm | 4kw*1 | 6000mm | 3 | 1.1kw*three | Planetary cutter |
| HDPE-315 | Φ110mm-φ315mm | 5.5kw*two | five.5kw*2 | 6000mm | five.5kw*one | 6000mm | four | one.1kw*four | Planetary cutter |
| HDPE-630 | Φ315mm-φ630mm | seven.5kw*two | seven.5kw*two | 6000mm | seven.5kw*one | 6000mm | six | one.1kw*6 | Planetary cutter |
| HDPE-800 | Φ400mm-φ800mm | 5.5kw*2(2m) | 5.5kw*2(2m) | 6000mm | 5.5kw*two | 6000mm | 8 | 1.1kw*8 | Planetary cutter |
| 7.5kw*2(10m) | seven.5kw*2(10m) | ||||||||
| HDPE-1200 | Φ630mm-φ1200mm | 5.5kw*two | 7.5kw*2 | 6000mm | seven.5kw*2 | 6000mm | ten | one.1kw*ten | Planetary cutter |
Machine photograph:
Extrusion device
Vacuum Calibration Cooling tank & Spray Cooling tank
Haul-off Unit
Planetary Automobile-Cutter
Plastic Pipe Stacker
If you have any queries, please make contact with us:
Mob/Watsap/Wchat:+86-18915692496
The use of authentic equipment manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our company and the outlined substitute parts contained herein are not sponsored, accredited, or made by the OEM.
