Highest wear resistance out there by sealing grease in between pins and bushings
The durability of chain is dramatically enhanced given that grease is sealed between the pins and bushings by O-rings. The O-ring chain would be the most reliable model from the Ultimate Lifestyle Chain Series with its superb wear resistance even within the problems or environments where chain maintenance is complicated.
Proposed utilizes.
?Situations wherever frequent chain substitute is required as a consequence of wear stretch
?Situations where lubrication during the service is not possible
?In an atmosphere with substantially soil, sand, dust, and so on.
?Applications that demand power larger than that of the sintered bushing roller chain
Other attributes
?Decreasing noise. (The noise degree is three dB decrease compared to conventional roller chains.)
?Lowering vibration together with the friction developed by O-Ring. (The energy reduction due to the friction is nearly negligible, because the frictional force among the pins and bushings is for typically inside the applications.)
Collection of chains
The strength of an O-ring chain is almost exactly the same as that of the regular roller chain. (Since the pins are longer than these of normal roller chain, 
the typical rupture strength is somewhat reduce.)
For picking out an appropriate chain, refer to “Selection of Chains” .
Once the services ambient temperature is larger than 80° C, specific heat resistant O-rings has to be utilised. In this instance, make contact with us for a lot more info.
Connecting back links and offset backlinks
Two sorts of connecting links are available: clearance fit and interference fit. When high strength or sturdiness is needed, use interference-fit connecting hyperlink. Only 2POJ is accessible since the offset hyperlink for all sizes.
Sprockets
O-ring chain uses longer pins than a common roller chain. When applying multiplex O-ring chain, the standard sprocket for multiplex chains cannot be utilized.
Caution
O-ring chain isn’t advisable in applications wherever solvents or other substances may attack “Nitric Rubber”. Particular material O-rings may also be available for these problems: Please talk to us for particulars. In general, “Nitric Rubber” is broken by make contact with with all the following chemical elements.
