Cycloidal pinwheel reducer is usually a up-dated of fresh type transmissing machine made with K-H-V less teeth engagement and the cycloidal pin steering wheel clenching system, which are widely used in drive and minimizing of textile and dying, foodstuff, 
mining and metallurgy, Essential oil and chemical job machinery etc, cranes, Market and conveyors. various fields.
Features:
1. Gear is made from high durability low carbon alloy metal by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is used for all with high accuracy, gears and good contact performance
2. high transmission productivity: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light-weight, long service lifestyle and high bearing ability;
5. convenient to disassemble, assemble and check.
Operation specifications and precautions
1.High modularization design: many equip with various engine or other power type conveniently.Same machine type may equip with many power motor. It is easy to realize the combination and
junction between every equipment type.
2.Transmission ratio: okay division, wide scope. The combined machine type may form large transmitting ratio, i.e. output suprisingly low rotary speed.
3.Form of set up: the position to be installed is not limited.
4.High strength, compact: the box body is made of large strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and good grinding process, which means bearing capability of unitvolume is large.
5.Long life: Beneath the condition of right type chosen (including choosing appropriate operation parameters)normal operation and maintenance, the life span of main parts of speed reducer (except dressed in parts) shouldn’t be significantly less than 20000 hours. The wearing parts include lubricating bearing, oil seal and oil.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is normally low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer
1. High speed ratio and efficiency
Single stage transmission may reach to 1 1:87 of speed-straight down ratio and the efficiency is normally more than 90%. If make use of multi-speed drive the speed-down ratio can be bigger.
2. Compact
Being adapted epicyclic tranny principle, the input and outcome shaft are in same axis center, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is bound anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be acquired.The structure is simple, but it can recognize high reduction ratio gadget.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved as well, and there are two gears engaged with 180 degree symmetry. As a result, the influence of tooth pitch mistake and cumulative tooth pitch mistake on the rotation accuracy is relatively average, making the positioning precision and rotation precision reach a very high level.
4. Less parts, easy installation
The three basic components achieve a higher deceleration ratio, and they are all on a single axis, therefore the kit is simple to install and easy to shape.
5. Small in size and light in weight
Compared with the prior gear device, the volume is 1/3, the fat is 1/2, but can buy the same torque ability and reduction ratio, obtaining small lightweight.
6 High torque capacity
Flexible wheel materials USES exceptional steel with huge fatigue strength.Different from ordinary transmission product, the quantity of teeth meshing makes up about on the subject of 30% of the full total number of teeth. Furthermore, it is in call with the surface, to ensure that the pressure borne by each equipment is reduced and substantial torque ability can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the energy loss due to friction. Therefore, high decrease ratio may be accomplished while maintaining high proficiency, and miniaturization of traveling motor could be realized.
8. Low noise
The gear meshing cycle rate is low, the transmission motion force balance, which means procedure is quiet, and the vibration is quite small.
◆Large speed ratio and large efficiency single-stage transmission can achieve a deceleration ratio of just one 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission is used, the deceleration ratio will end up being larger.
◆Because planetary transmission basic principle is adopted, the input shaft and end result shaft are on the same axis line, so that the machine version can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is larger, and the mechanism of balancing machine parts produces the vibration and voice limited to a minimum.
◆Reliable use and prolonged service life as the key parts are made from excessive carbon chromium steel, excessive strength is going to be obtained by quenching (HRC58-62), and rolling friction is used in some transmission contacts, therefore the service life is lengthy.
Cycloid reducer is normally a cycloid needle teeth meshing planetary transmission principle drive models, is a great transmission has many advantages, versatile, and will be both negative and positive operation.
•Big ratio, and large efficiency Smooth operation,
• low noise The make use of reliable,
• extended life can reach 50000 hours
• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),
• operation and contact with rolling friction, basically very little wear, durable.
• Compact structure,
• small size Because the consumption of a planetary transmitting, the input shaft and the end result shaft on a single axis, which makes the model to get the smallest possible size.
• Reasonable design, easy maintenance, and breakdown easily install,
• minimal number of parts and also straightforward lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt essential double wall planet pinion precision, enhance the output strength and carrier.
(2).Hoop clamp coupling have five connection methods well suited for different application environments.
(3).Size above PL/PF120(incorporating)precision and high power integral inner gear casing, processed in a single station,which eradicate the cumulative error and assembling error of split type.Get rid of casting process;adopt sizzling of forging process, that may decrease the blank material defects.
(4).The meshing equipment adopt shaving process after carburizing and quenching,which simpler to make gear surface area smooth and high precision,reduce the temperature rising due to gear area gluing and friction.
This series worm-gear reducer was designed after RV worm microreducer, that have a complete norm, wide speed for selection, and several mounting positions. Its effectiveness and mounting dime nsions conform the same types of foreign.
The mixture of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, beautiful shape, low noise, radiate heat efficiently and compact structure.
Great sealing and adaptability.Its combo with T equipment reducer and MB/MBN variator can meet a myriad of speed requirement.
